CV
Education
- M.Eng. in Mechanical Engineering (Robotics & Controls), Cornell UniversityAug 2026 – May 2027
- MEC Fellowship ($30,000) and Academic Tuition Scholarship ($6,000)
- B.S. in Mechanical Engineering, Summa Cum Laude, GPA: 3.98, University of Hawai’i at MānoaAug 2023 – May 2026
- Manoa Academic Scholarship ($12,000) and ASUH Research Scholarship ($1,000)
- Selected coursework: Robot Perception, Model-Based Estimation, Optimization for Robotics, Manipulator Robotics, Legged Robots, Swarm Robotics, Maritime Robotics, Soft Robotics, Continuum Mechanics
Work experience
- Oct 2026 – Present: Graduate Research Assistant
- Lamp Lighter Lab, Ithaca, NY
- Concurrent optimization of robotic hardware and control for bipedal robots, supervised by Steve Heim
- Sep 2026 – Present: Robotics Engineer
- ASML, Ithaca, NY
- Re-architecting a legacy LabVIEW control system into a modular ROS 2 stack of custom C++/Python nodes for a reticle-handling robotic arm
- Validating control logic and testing safety in a Gazebo simulation with MoveIt 2 before running on the arm
- Enabling closed-loop, real-time velocity control of a multi-axis arm by deriving forward/inverse kinematics and Jacobian-based force mapping that convert end-effector targets into joint-space commands
- May 2024 – Jul 2026: Mobile Robotics Research Assistant
- RIP Lab, Honolulu, HI
- Achieved stable vertical-surface operation for a 50-lb magnetic climbing robot by optimizing wheel and magnet geometry through MATLAB and COMSOL simulation before fabrication
- Cut prototype iteration time by designing parts such as sensor housings and caster wheels in Onshape and producing them in-house with FDM and resin 3D printing
- Provided real-time orientation feedback by building a C++ ROS 2 pipeline that fuses dual 9-DOF IMU streams with an Extended Kalman Filter and visualizes the state live in RViz2
- Built an enclosure with cooling fan, heater, and I2C temperature sensor, with a Python tool to track temperature within 5% of a reference sensor, simulating heat generation from batteries in the enclosure
- Aug 2025 – May 2026: Lead Systems Engineer
- Team Kanaloa, Honolulu, HI
- Led a team building a 400-lb autonomous surface vessel; validated the Python/C++ PID control and autonomy stack in Gazebo (URDF model, checked against a Fossen hydrodynamic model) before on-water testing
- Achieved centimeter-level real-time localization by implementing an EKF node that fuses 3 GPS modules and 2 IMUs with RTCM corrections
- Wrote low-level ROS 2 drivers (I2C, UART, SPI, USB), designed a custom sensor PCB in KiCad, and integrated ESCs with live feedback and a Ubiquiti radio link for real-time communication during field testing
- Ran comparative FEA in SolidWorks across hull composite layups to select a design with a factor of safety of 5 in 4-foot wave conditions
Projects
- Aug 2026 – Present: Unitree Go2 X Quadruped Robot Dog
- Ithaca, NY
- Building a MuJoCo simulation environment of the Go2 and training a locomotion policy with deep reinforcement learning (PPO) in PyTorch
- Designing the observation/action spaces, reward function, and training curriculum, with domain randomization to improve sim-to-real transfer, then deploying the trained policy and validating the pipeline via unit tests
- Aug 2026 – Present: Autonomous Path Planning of a Differential Drive Robot
- Ithaca, NY
- Building a ROS 2 autonomy stack with Nav2 and ros2_control in Gazebo that maps unknown environments with SLAM using a lidar, wheel odometry, and slam_toolbox to navigate autonomously
- Implementing global path planning with A* over an inflated occupancy-grid costmap and tracking paths with a DWB local planner for dynamic obstacle avoidance
- Tuning costmap inflation, controller, and recovery-behavior parameters to achieve robust goal-reaching in simulation
Technical skills
- Software
- Python, MATLAB, ROS 2, Gazebo, MoveIt 2, KiCad, C++, MuJoCo, Linux, Git/GitHub, PyTorch
- Hardware
- SolidWorks, Onshape, COMSOL, FDM & resin 3D printing, CNC/mill/lathe, Arduino, Teensy, Raspberry Pi, I2C/UART/SPI/USB, PWM motor actuation, soldering, and tensile testing
Teaching
Honors & activities
- Pi Tau Sigma Honor Society
- American Society of Mechanical Engineers (ASME)
- Institute of Electrical and Electronics Engineers (IEEE)